LED Lightbar Fail…

This Nilight 26 inch LED lightbar ended up being a fail on my vehicle. I noticed when I opened the box that the mounting system was completely different than the one that is on my wifes vehicle. Perhaps this LED lightbar has a different application, one that I am unaware of. While installing the LED lightbar I noticed that I could never seem to get the bolts tight enough. I wasn’t trying to crank them down super tight, rather, it was more like just a bit past snug.

Questionable mounting system.
Nut almost pulled completely out of the channel. The aluminum is too soft.

As you can see from the picture above, the nut that is designed to ride inside the channel for adjustment purposes, has almost completely pulled out. All 4 of those nuts were in a similar condition. Again, I didn’t put a lot of torque on these nuts but it sure looks like it. Eventually I decided to just remove the lightbar and figure out another lighting solution. I started looking for a more robust mounting system and decided to give a pair of round LED lights a try.

Two 7 inch Round 51 watt LED lights.

These two lights had a better mounting system that rely on metal brackets to secure it to the SSD lightbar mount. The lights themselves are much more robust and better made. These are surprisingly heavy compared to the LED lightbar. We’ll see how long they last and I’ll report back at a later date.

I may have broken my mantra of “Buy once, cry once” but time will tell.